PT.B P I an innovative solutions |
Home | about | activity&service |  |
|
PT.B P I an innovative solutions |
Home | about | activity&service | |
Replace slip ring on the radar antenna. Slip ring is an important component in the radar system. Transaction data between the antenna and radar proccesing through this section, so it affects the accuracy of the information generated. Also it is a moving part, so it needs a specially care. Improved radar card. Function of various modules radar if they have good board can be repaired to function again, but if the board had been severely damaged, it is replaced with a new board. The new module manufacturing is usually done for the supply of spare parts.
Some industrial processes in Indonesia are still using the old generation system, main problem on maintenance is a electronic module components. Electronic module is very important because it serves to control the overall process. By re engineering process, electronic module created for support the old system can be operated. And we have done in the radar system and the cement industry process.
Radar display system replaces old system is converted to the new system with the same functionality. Data from received processor do digitization then to display on the LCD monitor. Functions that exist in the old system were maintained. Added a new function so that the radar could be used more optimally. New radar can make create flight simulation and guide pilots to control flight simulation. Some new radar display system can combined will be to display in the national new radar display.
Avionics system laboratory, is a system that can be used to detect damage an aircraft avionics systems, namely the front panel cockpit, the gyrocompass. Message shown are details of the damage to the system that need to be repaired. System can be combined with visual displays and flight control to assembled be flight simulator. The system used standard aircraft data communication is ARINC 429 and MIL STD 1553.
TCCR module is a very important in radar system. That use to change mode operation from radar transmit. Radar mode is needs defense strategy, to deter the detection enemy aircraft in the event in electronic war. For protect the system from Radar Jammer & Radar Scrambler. For avoid radar jammers, radar operates in random mode. To sharpen monitoring at one position, radar activated at any bearing. All settings can done if the TCCR module in good condition. GCI radar needs TCCR module
The process control system (PCS) consists of several field instrument sets to determine field conditions. This system is equipped with sensors that are connected to a number of controller devices. From here, users can find out data regarding fluid flow, pressure, and temperature in the pipes.
Then, the process control system can also be used for things that include utilities. In oil and gas production, several types of power plants are used, ranging from electricity, water, to air.
For this reason, Benny gave an example of an electrical control that can immediately turn off the power source as soon as the sensor identifies a dangerous condition. Things like electrical control are connected to two types of controllers, one of which is PCS.